NEXCOM NEX 609 - Manual (Page 17)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 3 NEX 609 User Manual
Chapter 1: Product Introduction
I/O Interface
▪ Serial port: 6 port
– COM1, 6: RS232 DB-9 male connector on edge I/O
– COM2: RS232/422/485 DB-9 male connector on edge I/O
– COM3, 4, 5: RS232 1x 6 2.0mm JST connector
▪ USB 2.0/ 3.0: 10 ports
– USB 3.0 x4 ports edge connector
– USB 2.0 x6 ports by 2.0mm pin connector
▪ 8 GPIO lines via header (GPI 0 ~ 3 and GPO0 ~ 3) TTL Level (0/ 5 V)
▪ Onboard Power LED and HDD Active LED Pin Header
▪ 1x 4-pin fan connector (for CPU)
▪ 1x 3-pin fan connector (for System)
▪ 1x Keyboard/Mouse pin header
▪ On board Buzzer/ SMBus2.0/ Reset SW/ On & Off switch button
Edge I/O Interface
▪ 1x dual stack DB9 male + DB9 male for COM1 & COM2
▪ 1x HDMI
▪ 1x DVI-I + DB9 male for COM6
▪ 2x RJ45 + dual stack USB
▪ 1x Line-Out/ Mic-in/ Line-in
Watchdog Timer
▪ Watchdog timeout can be programmed by software from 1 second to
255 seconds, and from 1 minute to 255 minutes (Tolerance 15% under
room temperature 25°C)
Storage
▪ 4x SATA port with RAID 0,1,5,10 function (optional)
System Monitor
▪ Monitoring of 4 voltages and 2 temperatures and 2 fan speed detection
▪ 4 Voltage (Vcore, +12V , +3.3V , 5V)
▪ 2 Temperatures (CPU, System)
▪ 2 fan speed detection
On-board RTC
▪ On-chip RTC with battery backup
▪ 1x External Li-Ion battery
Power Input
▪ Support AT and ATX mode
Power Requirements
▪ Power requirement: Dual +12V & 24V DC Input
▪ One 4-pin power connector
Dimensions
▪ Mini-ITX M/B form factor
▪ 170mm (L) x 170mm (W)
Environment
▪ Operating temperatures: 0°C to 60°C
▪ Storage temperature: -20°C to 85°C
▪ Relative humidity: Operating 10% to 90%, non-condensing
Certifications
▪ CE approval
▪ FCC Class A