Cpu configuration, Trusted computing – NEXCOM NEX 609 User Manual
Page 48
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
34
NEX 609 User Manual
Chapter 3: BIOS Setup
CPU Configuration
This section is used to configure the CPU.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled for Windows XP and
Linux (OS optimized for
Hyper-Threading Technology)
and Disabled for other OS (OS
not optimized for
Hyper-Threading Technology).
When Disabled only one thread
per enabled core is enabled.
CPU Configuration
Intel(R) Core(TM) i7-3610QE CPU @ 2.30GHz
CPU Signature
Microcode Patch
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
Hyper-threading
Active Processor Cores
Intel Virtualization Technology
306a9
12
2300 MHz
4
Supported
Supported
Supported
Supported
[Enabled]
[All]
[Disabled]
Hyper-Threading
This field is used to enable or disable hyper-threading.
Active Processors Cores
Select the number of cores to enable in each processor package. The options
are All, 1, 2 and 3.
Intel
®
Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
Trusted Computing
This section is used to configure Trusted Platform Module (TPM) settings.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enables or Disables BIOS
support for security device.
O.S. will not show Security
Device. TCG EFI protocol and
INT1A interface will not be
available.
Configuration
Security Device Support
Current Status Information
SUPPORT TURNED OFF
[Disable]
Security Device Support
Enables or disables BIOS support for security device. O.S will not show
Security Device. TCG EFI protocol and INT1A interface will not be available.