NEXCOM VMD 1000 - Manual (Page 5)

Preface
Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. VMD Series User Manual v
as these can damage the soft metal or plastic parts of the connectors.
Handling Precautions
▪
Always disconnect the unit from the power outlet whenever you are
installing or fixing a component inside the chassis.
▪
If possible, always wear a grounded wrist strap when you are installing
or fixing a component inside the chassis. Alternatively, discharge any
static electricity by touching the bare metal chassis of the unit case, or
the bare metal body of any other grounded appliance.
▪
Hold electronic circuit boards by the edges only. Do not touch the
components on the board unless it is necessary to do so. Do not flex or
stress the circuit board.
▪
Use the correct screws and do not overly tighten them.
▪
Keep the original packaging and static-protective bag in case the unit
has to be returned.