One Systems Pole Mount Mini - Manual (Page 6)

Now the loudspeaker (103IM or 106IM) should be mounted to the loudspeaker
bracket (PT-10) using the supplied stainless steel bolts and washers (M5). It is
recommended that the desired pan and tilt angles of the loudspeaker be set on
the PT-10 portion of the assembly prior to mounting the loudspeaker.
The instructions for the PT-10 portion of the Pole Mount Mini are also included
and should be referred to when setting the pan and tilt angles.
3. The Pole Mount Mini is supplied with a forged shoulder eye bolt. This bolt is
designed to be used with a secondary cable assembly. This cable assembly
must be configured AFTER the enclosure is mounted on the PT-10 portion of
the Pole Mount Mini.
An M8 eye bolt is supplied to allow the 106IM enclosure to be fitted with the
supplied cable assembly. An M5 eye bolt is supplied to allow the 103IM to be
fitted with the supplied cable assembly.
INSTALLING THE POLE MOUNT SYSTEM WITHOUT THE CABLE ASSEMBLY
IS NOT ALLOWED!
NOTE: Review all remaining sections before configuring the cable assembly!
4. Configuration of the supplied cable parts (cable, thimbles and compression
sleeves).
DO NOT PRE ASSEMBLE THE CABLE.