OT Systems ET1100C2 series - Manual (Page 4)

ET1100C2 Series
Industrial 10/100Base-TX Ethernet plus CVBS Over Coax Converter
4 V1.3
The Port Status LEDs, dimension drawing of the Micro unit
Indicator Color Description
PWR
Green Power on.
Off Power off.
COAX
DATA
LINK
Green The COAX DATA link
(between TX & RX) is
established.
ACT
Flashing Data is being
transmitted or received.
ACT Stands for Activity.
CVBS IN (TX only) Green Video input
CVBS OUT (RX only) Green Video output
10/100
(Ethernet)
SPD
Orange 100Base-TX
Off 10Base-TX
LINK/ACT
Steady A valid network
connection is
established
Flashing Data is being
transmitted or received.
ACT Stands for Activity.
Functional Description

Ethernet Extension : Security Link over Coax

Simultaneous transmission of IP and CVBS over single coaxial cable

Constant Data Rate : 36Mbps(Downlink)/11Mbps(Uplink)

Maxiumum distance : 300m over Coax(RG-59/U)

Support Auto MDI/MDI-X

-10 ℃ to 60℃ operating temperature.
Assembly, Startup, and Dismantling
Installation

Installation: Mount the Micro type unit onto a fixture, or camera housings, e.g. a plank, (either on the wall or on
a flat surface) with at least 2 screws piercing through the holes on the mounting frame to secure it in position.

Startup: Connect the supply voltage to start up the Media Converter via the terminal block.

Dismantling: Locate and remove the securing screws. Usually, but not limited to, at least 2 screws.
Manual Earth Green manual is available on our website www.ot-systems.com