OT Systems ET1111 series - Manual (Page 14)

ET1111 Series Installation & Operation Manual
www.ot-systems.com 14
(6) Specifications
Ethernet
Standards IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX/FX
IEEE 802.3x
Address table size 2048MAC addresses
Processing Type Store-and-Forward
Half-duplex and IEEE802.3x Full-duplex flow control
Forward and Filter Rate
10Base-T
100Base-TX/FX
10 / 20Mbps half / full-duplex
100 / 200Mbps half / full-duplex
Cabling
10BASE-T
100BASE-TX
UTP/STP Cat. 3, 4, 5 or above
UTP/STP Cat. 5 or above
Maximum Distance
Cat5 UTP Up to 100m
Connector
10/100BASE-TX 1X RJ45
Optical
Cabling
62.5/125μm (Multi-mode)
9/125μm (Single-mode)
Maximum Distance
Multi-mode fiber 2Km
Single-mode fiber 20Km
Wavelength(s) 1310nm
1310/1550nm
Connector SC or ST
Electrical and Mechanical
Input Power 12VDC or 24VAC (Terminal Block)
Power Consumption 2.4W Max.
Operating Voltage & Max.
Current Consumption
0.2A @ 12VDC