Paxton Superchargers Universal Big Block Mopar 440 Carbureted System - Manual (Page 24)

16
P/N: 4809662
©2009 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
02NOV10 v2.0
6.3 BELT INSTALLATION
A. Start by adjusting the tensioner idler previ-
ously installed on the dual bracket, all the
way up to the highest point.
B. Next route the supplied 10 rib serpentine belt
around the newly installed crank drive pulley
and up around the supercharger drive pulley
making sure the belt is routed underneath the
tensioner idler attached to the tensioner plate.
C. Adjust the tensioner by torquing the tensioner
screw so that idler pulley is lowered onto the
drive belt applying tension.
D. Once adequate tension is applied lock the
tensioner in place by finally tightening the
jam nut on the tensioner arbor previously left
loose for adjustment purposes. (See Fig. 6.3-
a.)
Fig. 6.3-a