Pinnacle Systems NSD - Manual (Page 14)

9
Installation and Operation
NSD Safety Mat System
NSD-DR-01 (Basic DIN-rail Controller)
NOTE:
Mat Wiring for Mat Styles “W” and “P” are
shown above (Blue, White, Black, Brown)
Mat Wiring for Mat Styles “X” and “E” are
Black, Red, Red, Black
(and are wired in that order)
Canadian market wiring is black, red, red,
black with 18-guage wiring size.
Red Grn
Note:
Safety Relay outputs are
N.O. (Held Closed) and
are wired into your
STOP circuit(s).
Aux Relay should only
be used for indicator
lights
Manual Relay Latching
Reset: Wire Terminal #2 to
#16 and use the Green
ZONE RESET button to
reset
Optional Remote Latchingl
Relay Reset: Use a N.C.
push button wired as shown
above
Optional Remote 24vdc
Status indicator lights