TabletKiosk MediSlate MCA i1040XT - Manual (Page 2)

Congratulations on your purchase of a MediSlate™ MCA i1040XT (mobile clinical assistant).
Your MediSlate MCA, featuring a resistive touch screen that complies with the requirements
of the Americans with Disabilities Act, was designed to be up and running quickly.
What’s in the Box
Your MediSlate MCA should come securely packaged in its shipping container along with the
items listed below. Contact your dealer immediately if you find that anything is missing or
damaged. Note, however, that contents may be changed without notice.
1. AC Adapter with Power Cord
2. Operating System Quick Start Guide
3. System Restore Disc (may include recovery image on the HDD in lieu of, or in addition to, disc)
4. This Quick Start Guide
5. Two (2) Standard Lithium-Ion Battery Packs
6. Stylus Pen with Tethering Strap (may come already attached to the MediSlate MCA)
Setting Up Your MediSlate MCA
Please read the following steps to help you begin using your new MediSlate MCA i1040XT as
quickly and easily as possible.
Step 1: Insert the Battery Packs
Turn the MediSlate MCA over and place it, screen down on a solid, clean, flat surface.
CAUTION: When turning over the MediSlate MCA, be careful not to place it on a rough or uneven surface
that could scratch or damage the touch screen.
Align the batteries into their battery compartments and then slide the locking tabs down until
they click securely into place. It does not matter which battery goes into which compartment,
but if you are planning on running the MediSlate with only one battery, place it into the right
hand compartment labeled as “battery 1”.
Step 2: Place the MediSlate MCA into the Docking Station (Windows XP Pro and Vista)
In order to complete the Windows XP Professional and Windows Vista installation, you should
use a USB keyboard to answer some of the questions. As part of the sealed nature of the
MediSlate MCA i1040XT, you will need to place it into the optional docking station so it can
use the USB connectors. If you don’t have access to the dock, you can still complete the instal-
lation, you will just need to edit the appropriate computer name, Administrator password and
user’s name(s) at a later time.
Before placing the MediSlate MCA into the docking station, locate the power cord that came
with the dock and plug it into the DC Power port and then the other end into an external
power jack. Orient the MediSlate MCA so that the docking connector is facing down toward
the docking connector in the docking station. Carefully slide the MediSlate into the docking
slot and press down carefully until you hear the docking station’s electronic locks engage.
Align the batteries so the contacts touch and then place them so they sit flush to the back of the
MediSlate MCA. Slide down the locking tabs all the way to secure the batteries.