Tru-Weld TWE250 CD Welder - Manual (Page 10)

10
TRAINING
Use of this equipment must be limited to authorized personnel only. They must be
adequately trained, and have read and understood everything in this manual. The
manual must be available to operators at all times.
INSTALLATION
Select a site for the equipment which is capable of supporting the weight of the
equipment, which is clear from traffic routes where people may trip over cables, or
they may be damaged by other equipment or vehicles.
Do not hang connecting cables over sharp edges or have near heat sources.
DISPOSAL
The equipment, in its entirety or as components/parts may be disposed of as general
industrial waste or scrap. None of the components used in the manufacturing of the
CD Welders are toxic, carcinogenic, or otherwise harmful to your health.
SAFETY
AUTHORIZED
PERSONNEL ONLY