Xtramus NuApps-SwitchPerform V1.8 - Manual (Page 12)

12
3. NuApps-SwitchPerform Function Overview
3.1. Starting NuApps-SwitchPerform
Before starting NuApps-SwitchPerform, the DUT, your PC, and NuStreams-2000i/600i shall be connected
as shown in the figure down below:
There are two ways to start NuApps-SwitchPerform:
Starting NuApps-SwitchPerform
•
Click Start
Æ Programs Æ NuStreams Æ
NuApps-SwitchPerform.
• Double-click NuApps-SwitchPerform icon
located on your PC’s desktop.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®