Xtramus NuWIN-RM V1.4 - Manual (Page 54)

54
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS ®
One to Multi –Ports Arrangement
1. You can configure the streams
transmitted from the Member
Ports to the Root Port in the
Up Stream area.
2. The port you ’ve assigned will
be displayed on the Root Port
field. If you would like to
remove that port as root port,
click the < button.
3. To assign an available port as
the Member Port, click the port
and press the > button as
shown in the picture on the left.
If you would like to assign all
available ports as the Member
Port, press the >> button.
4. The port you
’ve assigned will
be displayed on the Member
Port field. If you would like to
remove a port from the
Member Port field, click the
port you would like to remove,
and press the < button. If you
would like to remove all ports
from the Member Port field,
press the << button.
5. You can view the MAC Address
and IPv4 Address of Root Port
and Member Ports. You can
manually input the IPv6
Address by double click the
IPv6 Address column.
6. Press the Apply button to apply
all the settings you ’ve made.