ZENNER multipulse - Manual (Page 8)

Operation test
Check the pulse counter module for any error
codes in the display after installation (see table
for error codes).
Most of the errors can be deleted by pressing
the button. If the error appears permanently, it
will be detected at the next measuring cycle and
displayed again.
When attaching the top cover on the housing
pulses on the inputs can possibly be generated.
Check readings of the inputs and correct if nec-
essary.
Sealing
We recommend sealing the device with the in-
cluded seals to prevent unauthorized opening.
Maintenance
Repairs or overhaul are only allowed by the
manufacturer or companies authorized by the
manufacturer.
8