AGI Security GV-JOYSTICK - Manual (Page 8)

GV-Joystick
3. Installation
There are two ways to connect GV-Joystick to GV-System by:
1. USB Port, or
2. the connection through GV-Keyboard.
3.1 Connecting to GV-System
The GV-Joystick is an independent device that can work with the GV-System directly. To
connect the GV-Joystick to the GV-System, use the supplied USB cable.
3.2 Connecting to GV-Keyboard
To work on the GV-System together with the GV-Keyboard, the GV-Joystick MUST be
connected to the GV-Keyboard. To connect the GV-Joystick to the GV-Keyboard, use the
supplied RS-45 cable.
3.3 USB Driver Installation
No matter which way you use to connect the GV-Joystick to the GV-System, it is required to
install the USB driver before use.
After hardware installation, the Found New Hardware Wizard will automatically detect the
device. Ignore the Wizard and follow these steps to install the driver:
5