Amina BackboxSW345 V1.4 - Manual (Page 4)

1
2
3
Packaging
Introduction
Overview
Thank you for purchasing the Amina Technologies BackboxSW. This product has been designed for the
installation of Amina Series Invisible Loudspeakers into solid (eg. brick, concrete) walls and ceilings.
Constructed from zintec steel, the BackboxSW is rugged enough to be installed early in the build
process.
Installation is simple however, please follow this guide carefully as it contains important advice on
speaker alignment for plastering and reducing structural energy transference.
CAUTION:
Take care when removing the BackboxSW from the carton.
The packaging for the BackboxSW has been carefully designed to protect the product during transit.
Please retain it in the unlikely event you need to return the product to your dealer or manufacturer.
Please recycle the packaging should you wish to dispose of it.
The BackboxSW outer carton is made up of 80% recycled single wall board.
Rubber grommets
Backbox mounting slots
Speaker mounting tabs 1
2
3
01
Part Numbers
BackboxSW345 - Evolution Series
BackboxSW300 - iQ Series/ LFieT Series
BackboxSW200 - Evolution “S200” models and AIW750E - HF Panel