Amina BackboxCV345 V1.2 - Manual (Page 4)

1
2
3
4
5
Packaging
01
Introduction
Overview
Thank you for purchasing the Amina Technologies BackboxCV. This product has been designed to
enhance the installation of your Amina Invisible loudspeakers by providing an optimised enclosure for
them to operate in. The BackboxCV provides 17dB SPL reduction from 200Hz and above (-25dB at
1kHz) of an Amina Invisible loudspeaker’s rearward airbourne sound output into the wall or ceiling
cavity.
Please note that the BackboxCV does not reduce mechanical impact type sound transmission in a
building. This can only be achieved by installing the product in mechanically/acoustically isolated stud
walls and ceilings. Please contact Amina for further advice.
The BackboxCV is relatively simple to install and this guide includes step by step instructions on the
correct way to do this in order to align the Amina Invisible loudspeaker for plastering.
CAUTION:
Take care when removing the BackboxCV from the carton.
The packaging for the BackboxCV has been carefully designed to protect the product during transit.
Please retain it in the unlikely event you need to return the product to your dealer or manufacturer.
Please recycle the packaging should you wish to dispose of it.
The BackboxCV outer carton is made up of 80% recycled single wall board.
The BackboxCV is formed from a fully recyclable aluminium enclosure.
Fold out support tabs
Rubber grommet
Speaker mounting lip
Backbox mounting lip
Soundproofing layer
Speaker fixing holes 1
2
3
4
5
6
6