13. v-scale plus front panel description, 14. v-scale plus rear panel description – Analog Way V-Scale C - VSL300 User Manual
Page 14
Chapter 1 : INTRODUCTION (continued)
VSL range
PAGE 14
1-13. V-SCALE PLUS FRONT PANEL DESCRIPTION
ANALOG WAY
LCD CONTROL
ENTER:
Validates a selected item.
A long push on this button allows to activate the STANDBY mode. A short push on a front
panel push button allows to wake up the device.
Allows to scroll thru the different menus (in Control mode).
FREEZE:
A short push allows to freeze the displayed output.
INPUT SELECTION: Selection of the 3 input sources.
C.VIDEO 1:
Composite source #1 selection (Input #1).
C.VIDEO 2:
Composite source #2 selection (Input #2).
RGB/YUV:
RGBS & YUV source selection (Input #3).
S.VIDEO:
S.VIDEO source selection (Input #4).
COMPUTER:
Computer source selection (Input #5).
NOTE: A long push (2 seconds) on the selected input button allows to active the BLACK function. A black screen
is displayed onto the output. A short push on an INPUT SELECTION button allows to inactive this
function.
1-14. V-SCALE PLUS REAR PANEL DESCRIPTION
IP/L
A
N
ON / OFF:
AC power switch (O = OFF, I = ON).
POWER:
Standard IEC connector (100-250 VAC, 1A, 50-60Hz automatic).
AUDIO IN & OUT
1
, 2, 3, 4 & 5:
Audio stereo inputs on MCO connectors.
L: Left, R = Right.
OUT
:
Audio stereo output on a MCO connector.
INPUT SOURCES
1-C.V:
Composite Video input #1 on a BNC female connector.
2-C.V:
Composite Video input #2 on a BNC female connector.
3-RGB/YUV:
RGBS & YUV (Y, Cr, Cb) video input on 4xBNC female connectors.
4-S.VIDEO:
S.VIDEO (Y/C) input on 4-pin mini DIN female connector.
5-COMPUTER:
Computer input on a HD15 female connector.
RS-232:
RS-232 communication port on a DB9 female connector.
DISPLAY OUTPUTS
ANALOG
:
Analog computer output (RGBHV, RGBS or RGsB) on a HD15 female connector.
DVI-I
:
Digital & analog computer output on a DVI-I female connector.
IP/LAN:
LAN communication port on a RJ45 connector (optional).