Anthony Gallo Dué - Manual (Page 5)

Placement of your speakers
These speakers are packaged with both a pedestal stand and a wallmount bracket. They can be
mounted vertically or horizontally on either of the supplied brackets. Mounting can also be
accomplished with dedicated floor stands. Whether used on a shelf, wall or floor stand, Dues have
been designed to provide extended, tonally neutral frequency response and create a vast, panoramic
soundstage. When wall mounting, you may experience an increase in low frequency output from
interaction between the speaker and the wall structure.
When placing these speakers atop a flat, horizontal surface, try to keep them near the front of that
surface. For the best performance, the speakers should be located within 1-2" of the front edge.
Placing the speakers toward the back of the horizontal surface causes diffraction effects, where the
sound reflects off the surface in front of the speaker and interferes with the directly radiated sound.
The position of the speakers in your room directly affects their performance. Small placement
adjustments within a room can sometimes create large performance changes. Experiment by moving
the speakers farther apart and closer together, toeing speakers toward the listening position, then
varying the distance between the speakers and the wall behind them, until you achieve the desired
affect. You may want to start by placing the speakers 6 to 10 feet apart depending upon your actual
room size and listening position.
Main speakers should be placed at about the same height from the floor as the seated listener’s ears,
and may be angled ("toed") slightly toward the listening position. Center channel speakers should be
located as close as possible to the center of the screen. Generally, this means placing the center atop
of the TV or, if the set is elevated, underneath. Surround placement will vary greatly depending on the
layout of the room. Discuss surround location this with your salesperson or contact us directly at
[email protected]
Anthony Gallo Acoustics speakers are generally sold through specialty audio retailers who provide their
customers with highly qualified salespeople. They will be happy to advise you on how to get the best
performance from you speakers.
Speaker Grilles
Your Dues are supplied with removable, perforated metal grilles. With its simple, streamlined profile,
these sconce-shaped grilles allow Due to compliment virtually any décor. Of course, many owners will
prefer the "High Tech" look of the speaker without its grille. Due has been engineered to perform
Installation Instructions
Due Table Mount
Step 1) Slide Speaker Mounting over
Base Plate ans align Base Plate notches
with axle. Pull bracket snugly over axle
until holes are aligned
Step 2) Use Thumb Screws (2) with
Lock Washers to secure Speaker
Mounting Bracket to Base Plate.
Pre Adjust angle of bracket and
snugly tighten Thumb Screws.
Align Mounting Holes
Base Plate
Thumb Screw
Lock Washer
Base Plate
Notches
Axle
Speaker Mounting
Bracket