Anthony Gallo Dué - Manual (Page 6)

Installation Instructions
Due Wall Mount Continued
Step 3) Re-adjust angle of speaker if necessary and re
tighten Thumb Screws untill snug. Hang Due’ onto bracket
assembly by tipping speaker mounting slot, on rear side,
onto bracket extension. Attach speaker wires and enjoy.
(Option: Speakers can be mounted Horizontally as shown)
Installation Instructions
Due Wall Mount
Step 1) Attach Wall Mounting Bracket to wall surface with plastic
anchors (or equal) and pan head screws. Slide Speaker Mounting
Bracket over Wall Mounting Bracket by aligning axle with slots. Pull
Speaker Mounting Bracket down until Thumb Screw holes are aligned
Step 2) Use Thumb Screws (2) with Lock Washers to secure Speaker
Mounting Bracket to Base Plate. Pre Adjust angle of bracket and
snugly tighten Thumb Screws.
Speaker
Mounting
Bracket
Axle
Wall Mounting
Bracket
Drywall or other
Wall Surface
Drill Access Hole for Wires
Align with Wire Hole in Plate
Plastic Drywall Anchor
Or Equal for Alternate
Wall Surfaces
Slots
Thumb Screw Lock Washer
Drywall or other
Wall Surfaces
Drill Access Hole for Wires
Align with Wire Hole in Plate
Plastic Drywall Anchor
Tighten Thumb Screws
Due Manual Layout 4/10/02 9:13 AM Page 6
Or Equal for Alternate