Apantac TAHOMA Platform - Manual (Page 18)

APANTAC LLC ● 7556 SW BRIDGEPORT ROAD ● PORTLAND, OR 97224, USA
PHONE +1 503 616 3711 ● FAX +1 503 389 7921 ● [email protected] ● WWW.APANTAC.COM
Page 18 of 67
Figure 1: GPI/O Electrical Characteristics
Table 9: Serial Port
Number of Ports 1 x RS232
Adapter RS232 to RS422 or RS485 (optional)
Connector RJ45
Baud Rate Up to 115200
UMD support Native to TSL and TSI, other third party
protocols via Apantac UIM*
Table 10: Ethernet
Network Type Fast Ethernet 100 Base-TX
Connector RJ45
Cable Auto-detect. Either straight or crossed cable
will work
UMD support Native to TSL and TSI, other third party
protocols via Apantac UIM*
*
UIM – Universal Interface Module. The UIM is a small footprint router protocol translator that
acts s a bridge between the Tahoma platform of Multiviewers and other third party router, tally
and UMD protocols. The UIM can support third-party TCP/IP, UDP as well as serial protocols.
The UIM can also act as an SNMP agent for the Apantac Tahoma Multiviewers.