Apantac TAHOMA Platform User Manual
Page 25
APANTAC LLC ● 7556 SW BRIDGEPORT ROAD ● PORTLAND, OR 97224, USA
PHONE +1 503 616 3711 ● FAX +1 503 389 7921 ●
●
WWW.APANTAC.COM
Page 25 of 67
Figure 8: Tahoma LE-32 rear panel view
Rear Panel indicators, connectors and buttons are:
1. RJ45: Reserved for future use
2. RJ45: For DVI/HDMI/VGA output with built-in extenders up to 2048x1080 @115ft
(35 meters) with optional active receiver. Passive receivers supports up to 35 feet.
3. BNCs: Input for video (auto-detect PAL/NTSC, HD/SD-SDI, and 3G HD-SDI)
4. BNC: LTC input to sync on screen clocks
5. BNC: Line level AES audio monitor output*
6. Rotary Switch: Reserved for future use
7. RJ50: GPI/O for control, alarm and tally
8. RJ45: RS232 serial
9. RJ45: IP control
10. SCSI connector: for discrete audio and GPI/O
11. Phone Jack: Line level stereo audio monitor output*
*Audio monitoring is available in line level in stereo and AES
25B