API Audio Rack Ears for the lunchbox - Manual (Page 2)

lunchbox® Rack Mount Conversion Manual 910-0859 REV. A - Page 2
3. Turn the unit around
and loosen the rear
panel by removing the
ten fastening screws
with a #1 Phillips head
screwdriver. Be careful
not to lose the lock
washers that are
installed onto the
screws.
4. For 500-6B lunchboxes:
Slide the rear panel to the
right in order to allow
access to the four
mounting screws that
secure the side-mounted
rubber feet.
For 8 Slot lunchboxes:
Remove the rear panel
completely from the
lunchbox. Place it in a safe location.
5. Remove the four
side-mounted feet by
unscrewing them
from the chassis with
a #1 Phillips head
screwdriver.