Aplex Technology ADP-1154 - Manual (Page 40)

ADP-1154 User Manual 40
Appendix A: Board Descriptions & Specifications
This appendix provides information on controller board features and specifications.
PenMount 9036 Control Board
The PenMount 9036 control board is configured for the RS-232 interface and it supports
4-wire, 5-wire and 8-wire touch screens.
PenMount 9036 Features
• DMC9000 touch controller
• Diagnostic LED on board
• Supports PnP and non-PnP mode
• Supports 4-wire, 5-wire and 8-wire touch screen
• Baud rate 19200 or 9600 bps selectable
• Automatic pin assignment adjustment
• Input voltage is 5V to 12V
• Bundled with PenMount drivers, which are also available for download from our
website
Connector Pin Definitions
Pin definitions for the two connectors on the PenMount 9036 control board follow:
Connector Pin Definitions for Touch Screen
Pin definition
/ wires
4-wire
touch screen
5-wire
touch screen
8-wire
touch screen
PIN 9 N/A N/A Right Sense
PIN 8 N/A N/A Left Sense
PIN 7 N/A N/A Bottom Sense
PIN 6 N/A Sense Top Sense
PIN 5 Right LR Right
PIN 4 Left LL Left
PIN 3 Bottom UR Bottom
PIN 2 Top UL Top
PIN 1 Ground Ground Ground