Argox OS-2130D - Manual (Page 13)

12
OS-2130D & OS-2130DE User’s Manual
Printer Controls and Indicators
Feed Button
Ready Indicator
Power Switch
Power Indicator
13
OS-2130D & OS-2130DE User’s Manual
The following table explains printer controls and indicators’
functions to help understanding LED indications and printer
status:
Control /
Indicator
Function
Power
Switch
 On: turns on normal operation (at “I” position)
 Off: turns off power ( at “O” position)
Note: Turn power off before connecting or
disconnecting cables
Power LED
 Off: Printer power off
 Green: Printer power on
 It will start blinking while “Media Out”, “Media
Gap Not Found” has been detected.
 Once printer cutter mode has been enabled,
when Cutter is jammed with paper or Cutter is
not installed, POWER indicator will blink.
 When RS-232 communication error is
detected, POWER indicator will blink.