Argox PT-90 - Manual (Page 84)

User’s Manual 78
8.3.20 System
The System Properties window displays device information such as General, Memory,
Device Name and Copyrights.
General information contained in the window includes operating system data such as software
version, processor and memory etc.
Figure 8-31 System Properties
The memory of the PT-9X30 is used for storage and programs. Basic memory capacity is
256MB. You can see the size of the memory cache used for running programs or storing data.
To check the Memory:
1. Select Go to Start → Settings → Control Panel.
2. Run the System and select the Memory tab.
3. The blue bar of the slider indicates the available memory capacity.
4. Left side is storage memory and the right is program memory.
The device name indicates the PT-9X30’s partnership relation when linked to the desktop
through ActiveSync.
To set up Device Name:
1. Select Go to Start → Settings → Control Panel.
2. Run the System and select the name of the device.
3. Enter the name of the device and its details.