Artesyn ATCA-7470 Installation and Use (October 2014) - Manual (Page 106)

BIOS
ATCA-7470 Installation and Use (6806800P15K) 106
4.11.2 IPMI Error Logging
BIOS generates status events like Firmware Progress events and error events.
The table below shows all BIOS supported IPMI sensors and their possible events.
Table 4-18 BIOS Supported IPMI Events
Sensor Event
System Firmware
Progress (0Fh) Offset 00h System Firmware Error
Supported Event Data2:
00h unspecified Error
01h No system memory
02h No usable system memory
03h SATA device failure
07h No console in found
0Ah No console out found
0Bh Firmware ROM corrupted
FDh OEM Error Extension
Supported Event Data3
09h Flash Write Error
21h CPU BIST Error
22h PCI Out Of Resource
50h IPMI Boot Parameter Default Area Read Error
51h IPMI Boot Parameter Default Area Locked
52h IPMI Boot Parameter Default Area Checksum Error
53h IPMI Boot Parameter User Area Read Error
54h IPMI Boot Parameter User Area Locked
55h IPMI Boot Parameter User Area Checksum Error
56h IPMI Boot Parameter User Area Write Error
60h North Bridge Error
62h No Space for Legacy Option Rom
Offset 02h System Firmware Progress
Supported Event Data2:
01h Memory initialization
02h Hard-Disk (SATA) initialization
03h Secondary processor initialization
04h User authentication
05h User-initiated system setup
06h USB configuration
07h PCI configuration
08h Option ROM initialization
09h Video initialization
0Ah Cache initialization
0Ch Console input initialization
13h Starting Operating System