Artesyn Centellis 4100 Installation and Use (2015) User Manual

Page 84

Advertising
background image

System Installation

Centellis 4100 Installation and Use (6806800D82E)

86

Procedure

To install a system, proceed as follows:

1. Insert the system into a standard 19" ANSI rack.

2. Fasten the system to the rack via the mounting brackets using eight bolts or screws

(minimum 6 mm (0.24 inch) in diameter) on the left side and eight on the right
side of the system.

3. Make sure that the system has been located in a place with room temperature for

at least 24 hours before powering it up.

Advertising
This manual is related to the following products:

AXP640 Installation and Use (April 2015), AXP1620 Installation and Use (August 2014), AXP1620 Installation and Use (September 2014), Centellis-4440/AXP-1440 Installation and Use (August 2014), Centellis-4440/AXP-1440 Installation and Use (July 2014), AXP1620 Installation and Use (May 2014), Centellis-4440/AXP1440 Installation and Use (August 2014), Centellis-4440/AXP-1440 Installation and Use (May 2014), Centellis-4440/AXP1440 Installation and Use (September 2014), AXP640 Installation and Use (May 2014)

Popular Brands
Popular manuals