Artesyn Centellis 4100 Installation and Use (2015) User Manual
Page 89
Advertising
System Installation
Centellis 4100 Installation and Use (6806800D82E)
91
10.Pull the rubber boots over the nuts.
11.Once the new PEM is installed and connected, turn on the feed power.
12.If the red LED is ON, turn off the feed power, reverse power, and turn on the feed
power.
PEM Damage
Applying reversal power causes damage to the electrolytic capacitors of the filter.
Therefore, only switch on the breakers if no red light is visible.
Advertising
This manual is related to the following products: