Artesyn MVME7616E Transition Module Installation and Use (April 2015) - Manual (Page 46)

Connector Pin Assignments
MVME7616E Transition Module Installation and Use (6806800A43D) 46
4.6 Ethernet Connector (J9)
The 10Base-T/100Base-TX Ethernet interface is a RJ-45 connector, J9. The connector shield is
tied to chassis ground. The pin assignments and signal mnemonics for this connector are listed
in
Table 4-6 .
4.7 P2 Adapter Connectors
4.7.1 3-Row P2 Adapter (J2)
The 8-bit SCSI connector on the 3-row DIN backplane P2 Adapter is a 50-pin connector, J2. The
pin assignments and signal mnemonics for this connector are listed in
Table 4-7 .
Table 4-6 10Base-T/100Base-TX Pin Assignments
Pin Signal
1 TD+
2 TD-
3 RD+
4 Terminated
5 Terminated
6 RD-
7 Terminated
8 Terminated
Table 4-7 8-bit SCSI Connector (3-Row P2 adapter)
Pin Signal Signal Pin
1 GND TERMPWR 26
2 SDB0 GND 27
3 GND GND 28