ATEIS CD16 - Manual (Page 20)

CD-16, CD-8
Page 20 of 22
9. Safety Declaration
• Do not expose the PSSG2 to extreme temperatures, direct sunlight, humidity, or dust, which
could cause fire or electrical shock hazard.
• Keep away water or other liquids from the PSSG2. Otherwise fire or electrical shock may
result.
• In case of using external power supply, connect the PSSG2 only to an 24 VDC outlet of the
type stated in this Owner's Manual. Otherwise fire and electrical shock hazard results.
• When disconnecting the power cord from an AC outlet always grab the plug. Never pull the
cord. A damaged power cord is a potential risk of fire and electrical shock hazard.
• Avoid touching power plugs with wet hands. Doing so is a potential electrical shock hazard.
• Take care for correct polarity when operating the PSSG2 from a DC power source. Reversed
polarity may cause damage to the unit or the batteries.
• Avoid placing heavy objects on power cords. A damaged power cord is a fire and electrical
shock hazard.
• Do not cut, scratch, bend, twist, pull, or heat the power cord. A damaged power cord is a fire
and electrical shock hazard. Ask your ATEÏS dealer for replacement.
• Turn off immediately the unit, remove the power cord from the AC outlet and consult your
ATEÏS dealer in any of the following circumstances:
• Smoke, odor, or noise getting out of the unit.
• Foreign objects or liquids get inside the PSSG2.
• The unit has been dropped or the shell is damaged.
• The power cord is damaged.
If you continue using the PSSG2, fire and electrical shock may result.
• Do not drop or insert metallic objects or flammable materials into the unit as this may result in
fire and electrical shock.
• Do not remove the PSSG2's cover, as there are exposed parts inside carrying high voltages
that may cause an electrical shock. Contact your ATEÏS dealer if internal inspection,
maintenance, or repair is necessary.
• Do not try to make any modifications to the PSSG2. This is a potential fire and electrical shock
hazard.