Avery Dennison Monarch 9864 Error Messages - Manual (Page 24)

05/08 Rev. AB USER MANUAL Error Messages
9844 – 9854 – 9864
24
1395 Label too wide
Status A printjob contains an #IM-command which exceeds the maximum
label/print width. The maximum print width depends on the printer type.
See the user manual for the maximum label width.
Action Reduce the label width set by the #IM-command in the print job, until the
label width matches the maximum print width.
1396 Label too long
Status Label length setting exceeds the maximum label length. The maximum
label length depends on the printer's memory configuration.
The info-printout "Memory Status" shows the maximum label length. See
the user manual for more information.
Action Reduce the label width setting.
1397 Label too short
Status The label length defined in the #IM command is smaller than the minimum
length.
Action Correct the length value in the label layout definition.
1398 Label too small
Status The label width defined in the #IM command is smaller than the minimum
width.
Action Correct the width value in the label layout definition.
1470 X-Offset
Status The x-position of a layout field (graphics, text, ...) is beyond the label
margin. The field is shifted automatically to the first valid position at the
correct side of the margin.
Action Check the x-positions of the layout fields and change them.
1471 Y-Offset
Status The y-position of a layout field (graphics, text, ...) is beyond the label
margin. The field is shifted automatically to the first valid position at the
correct side of the margin.
Action Check the y-positions of the layout fields and change them.