Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 37)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
37
Punch (Die Cut) level
9864 9844 9854
¯
Only if PRINT PARAMETERS > Punch mode = Manual.
xxx mm
Setting range: 0 to 255; Unit interval: 1
The value xxx is the current contrast (sensor value) of the loaded material,
which determines the threshold.
xxx = current measurement at the punch sensor
yyy = set threshold value
Example
Labels with black bars lengthways across the label
• Reading:
– Backing paper: 30
– Backing paper + label: 60
– Backing paper + label + black bars: 190
•
Setting value: 60
A setting value of 60 means that all readings over 60 are ignored, therefore
also the reading 190 at the black bar.
Punchlevel
Punch xxx Val yyy