Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 93)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
93
Apply mode
9864
¯
Only with USI board.
¯
Only, if DP INTERFACE > Interface type = USI Applicator.
Sets if the start signal at the USI (or pressing Cut) triggers the complete
Printing-Dispensing-Applying process, or only Applying.
After print The start signal triggers printing, dispensing, and applying of a label. A print
job must be loaded and the printer in online mode.
After start sig. The start signal triggers the application of a printed and dispensed label.
After applying the label, the next one is immediately printed and dispensed.
A print job must be loaded and the printer in online mode.