Avery Dennison 676 - Manual (Page 28)

28 • •• • Control Panel Operation
HOME SCREEN
R E A D Y F O R B A T C H E S
6 7 6 / 3 0 0
OR
B A T C H I D Q U A N T I T Y
P C L 0 0 1 1 0
When the printer is powered up and all initializations are complete, if there aren’t any
Batches to print, the "HOME" screen will be "READY FOR BATCHES" and the
model and print head density.
When there are Batches to be printed, the "HOME" screen will be the
"BATCH ID QTY” screen. The Batch ID / Batch Qty screen displays the
currently cutting batch ID and labels remaining to be cut. Note: Look into
suppressing leading zeros on batch quantity.
When the Batch Id/Qty screen is the home screen and the user presses the EXIT
button the Model and DPI are displayed briefly before the Batch Id/Qty screen is
shown.
If the printer is performing a FEED or a TEST pattern, the screen will show
"FEEDING" or "PRINTING TEST PATTERN" respectively on line two, the top line
will be blank
F E E D I N G
P R I N T I N G T E S T P A T T E R N
Pressing the MODE/Down Arrow key will take the user to the "PRINT/CUT
POSITIONS" screen.
Pressing the EXIT/Up Arrow key will take the user back to the "HOME" screen.