Avery Dennison SNAP 700 Stacker - Manual (Page 7)

Users Manual Model 500 Downstacker Description / Specifications •••• 7
Description / Specifications
Stacker Description
The Down Stacker Option is a low-end stacker for coated and woven fabric labels.
The stacker has several adjustments that can be made for the label size and material
to be printed and cut on the AVERY DENNISON 500 Printer or the Sonic Knife
when attached to an AVERY DENNISON 500 Printer. On most coated labels tested
to date, the finished stack is fairly even on the edges and the length may vary
dependent on stacker configuration adjustments, label material and size. The stack
for woven labels will not be quite as good as the coated tapes, but removal of the
labels and jogging them together on a table like a deck of cards is easily managed.
Figure 1 - AVERY DENNISON Model 500 Downstacker