Baby Lock Enterprise (BNT10L) Update Version 4.12 Instructions - Manual (Page 4)

Copyright

2004-2015 Baby Lock USA
Customer Support: 1-800-313-4110
BNT10L Ver. 4.12 Software Update – p.4
 Version 4.00 update provided the following changes.
1. The pause marks are displayed where the machine will stop for the appliqué patterns at the
thread color sequence display.
2. Improved so that the appliqué patterns with "APPLIQUE MATERIAL", "APPLIQUE
POSITION" or "APPLIQUE" are assigned to the same needle bar.
3. Changed so that the range of "Appliqué Distance" is between 0.0 mm and 10.0 mm (between 0"
and 0.4") in the settings screen.
 Version 3.12 update provided the following changes.
1. Fixed the situation where the machine may not work correctly when selecting the next section
of the pattern when embroidering a jumbo frame pattern.
2. Fixed the situation where the machine may reboot when canceling the message, which is
displayed when resuming the connecting embroidery patterns using camera function.
3. Fixed the situation where the key of connecting patterns, which is displayed, may respond when
the embroidery appliqué key or embroidery basting key is selected.
 Version 3.10 update provided the following changes.
1. Improved procedures for connecting embroidery patterns using camera function.
(* This feature is only available for Embroidery Upgrade I (BNT10-U (Sold separately))
users.)
Note:
The operation manual for the BNT10-U has been revised to show the improved procedure.
Download the revised manual to refer to the improved procedure.
BNT10-U Instruction and Reference Guide (PDF, 17.7 MB)
2. Improved the Stitch Recalculator feature for built-in patterns.
(* This feature is specific to Embroidery Upgrade I (BNT10-U (Sold separately)) users.)
3. Improved the performance for displaying the image on the LCD.
Improves response time when touching keys on screen.
4. Reduced the time for tracing corners of pattern when checking the embroidery area.
5. Added the three keys for switching the frame movement speed to move the embroidery position.
6. The embroidery time indicator on the LCD updates every minute.