Baby Lock USB Floppy Drive Driver Instructions - Manual

USB Floppy Disk Drive User's Guide
Recommended System Requirements
Macintosh Computer
l Apple iMac, iBook or Power Macintosh G3 or G4 with a USB port, 32MB of RAM, and a hard drive with 1 MB of
free space
l Mac OS 8.6 or later
Windows PC
l IBM PC-compatible, Pentium 133 MHZ; or higher, and CD-ROM Drive
l Windows 98, 2000 or Millennium
Package Contents
l USB Floppy Disk Drive
l USB A to B interface cable
l User's Guide
l Driver CD
Attention
l Use only USB hubs that feature AC power adapter.
l Do not strike, drop or other wise impact the USB Floppy Disk Drive.
l You can plug the USB cable into a USB port while the computer is turned on.
l Before you disconnect the cable from the USB port, remove the floppy disk from the drive
Windows PC Installation
Follow these steps to connect the USB Floppy Disk Drive to your Windows computer and install the driver software
For Windows 98
1. Turn on your PC.
2. Plug the USB Floppy Disk Drive cable in to a USB port of your PC. The System will automatically detect the
drive and display the Add New Hardware Wizard.
3. Click the "Next" Button.
4. Click the "Search for the best drivers for your device
(Recommended)", then click the "Next" button.