Optional accessories, Continued – Baby Lock Crown Jewel II (BLCJ18-2) Manual User Manual
Page 47
40
Horizontal Spool Pin
1.
An optional horizontal spool pin is available
for metallic and specialty threads wound on a
spool (not a cone).
2.
The horizontal spool pin mounts in the laser
stylus guide post on the top of the machine
(see Figure 8).
3.
When using delicate threads such as mylar,
certain metallics or very thin silk, on the
horizontal spool pin, skip thread guide A.
Thread the top hole only, of the three-hole
thread guide B, back to front.
4.
Continue threading the machine as explained
in steps 3 through 7 on pages 16 and 17.
Figure 8
Optional Accessories
continued
Crown Jewel II Micro Handles
Enjoy complete precision while long arm quilting.
These centralized, adjustable handles fit perfectly
in between the existing handles on the Crown
Jewel II for the ultimate control during micro-
stippling or close-up work.
The Micro Handles include fully integrated built-in
buttons, keeping all stitch controls at a quilter’s
fingertips. The Micro Handles also include an ad-
ditional LED light, providing extra illumination to
even the smallest areas.
Couching Feet Set
The Couching Feet Set includes three sizes of inter-
changeable couching feet: 1.5mm, 2mm, and 3mm.
You’ll have just the right size foot for adding
couched embellishments using a variety of
specialty threads, fibers and yarns to your quilt.