Baby Lock Eclipse DX (BLE1DX-2) Instruction and Reference Guide - Manual (Page 37)


U
S
I
N
G
S
P
E
C
I
A
L
T
Y
T
H
R
E
A
D
S
Threading Medium Weight Thread
Thread Cradle
Medium weight thread, including topstitching thread, Decor rayon and stretch nylon thread,
are too bulky to form a knot that would fit through the threading port, but they can slip
replaced (fig.A). Pull the thread out from under the foot
(fig.B), set the looper threading switch to "U" or "L"
according to which looper is to be threaded.
Cut a 24 inch strand of serger thread and fold it in half to
make the thread cradle. Insert the loose ends of the
(fig.C)
(fig.D)
Insert the specialty thread tail into the cradle loop (E),
and pull the serger thread ends until the specialty thread
comes through the looper eye (fig.F). Discard or set aside
the thread cradle.
A.
F.
B.
D.
E.
C.