Babycare TENS Elle TENS - Manual (Page 12)

The Mode Button
There are two modes available on the
Elle TENS, each with a Burst and Boost
function.
Mode 1 (Burst 1 and Boost 1), which has
been described above, is primarily used
for the earlier stages of labour.
Mode 2 (Burst 2 and Boost 2) can be
used when your labour advances and
your
contractions become more
frequent.
Press the Mode button to switch
between modes. You will see from the
User Display, that the number in the
small circle next to the BURST or BOOST
will change from 1 to 2 and vice-versa.
NB. Both modes are interchangeable
and can be used according to your
preference, not necessarily for the stage
of labour you are in.
The Opti-max Key
This provides extra versatility to your Elle
TENS. Increasing or decreasing the Opti-
max key will allow you to either heighten
or lessen the level of pulse power
transmitted to the electrode pads.
Pressing the OM key either + or - will
increase or decrease Opti-max sensation,
this is extremely useful for the final
stages of labour when you need an extra
surge of power.
There are 5 Opti-max levels indicated by
5 dots, enlarging in size as the Opti-max
power is increased. The unit will always
start up at Opti-max 3, which is exactly
half way between the highest and lowest
setting.
NB. The Opti-max key can be used
according to your preference and not
necessarily for the stage of labour you
are in.
9