Babycare TENS Elle TENS - Manual (Page 13)

Useful information
Continue stimulation for as long as
necessary,
unless you experience
discomfort.
If you stimulate for a number of hours
ensure the pads do not become dry. If this
occurs, switch off the unit, disconnect the
electrodes, and apply a small drop of
water to them.
Always ensure that the unit is switched off
before you remove the leads. Do not pull
the wires. Always remove the jack plugs
from their sockets by holding the plugs
between the forefinger and thumb.
N.B. The Elle TENS can also be used as a
standard TENS unit for relief of numerous
conditions, including after pains and post
operative pains. It is worth bearing this
in mind if you have a caesarian section.
Please seek medical advice first.
Troubleshooting Questions
Q) Why does the stimulation not appear
to be as strong after you have used the
Elle TENS for a while?
A) Increase the intensity, you may have
become used to a lower setting.
Q) Why does the stimulation feel strong
but ineffective?
A) You may need to reposition the
electrode pads.
Q) Why does the stimulation not feel
sufficiently strong even on a high
setting?
A) The batteries may need replacing.
Q) What do I do if there is no
stimulation, intermittent stimulation, or
weak stimulation felt even with a new
battery?
A) Check electrode contact. Check leads.
Check batteries. Phone Babycare TENS
on 0845 230 9737.
10