BAFO BF-7311 - Manual (Page 28)

Multi-LinQ USB 2.0 User’s Manual 28
5 5 5 5 # # # #
Q: What if Multi-LinQ USB 2.0 Cable can’t be successfully installed?
A: This situation always happened when your USB2.0 port provided by USB 2.0
PCI card.
If your USB 2.0 PCI Card use Orangemicro driver then please download version
2.0.9 (used at Windows98&ME&2000&XP) from following Web site.
www.orangemicro.com
If your USB2.0 PCI Card use Microsoft driver then please download version
5.1.2600 (used at Windows2000&XP) from Microsoft Web site.
Q: How can I know two PC are successfully connected?
A: The bottom of the screen will show “Remote Connected” at both computers.
Q: Should I un-install the driver each time when the cable been plugged-off?
A: You don’t have to un-install driver each time when you plug this cable off.
Unless you don’t want to use this cable any more, then you could un-install it
and remove driver from your PC.
Q: How can I connect 3 PCs to form a USB Network?
A: Connect one USB A type male connector of Cable#1 to PC1, Connect one USB
A type male connector of Cable#2 to PC3.
Connect the rest of A type male connector of Cable#1, 2 to PC2.
If you want to connect PC4 to this USB Network then connect Cable#3 to PC1
and PC4.
Connect PC5, PC6 …. to this USB Networking use the similar way.
6 6 6 6 * $ ' * $ ' * $ ' * $ '
Information in this document is subject to change without notice. The manufacturer
does not make any representations or warranties (implied or otherwise) regarding
the accuracy and completeness of this document and shall in no event be liable for
any loss of profit or any other commercial damage, including but not limited to
special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any
means, electronic or mechanical, including photocopying, recording or information
recording and retrieval systems without the express written permission of the
manufacturer.
All brand names and product names used in this document are trademarks, or
registered trademarks of their respective holders.