Baja Motorsports MB200 Operator's Manual - Manual (Page 7)

7 — English © 2014 Baja, Inc. All Rights Reserved.
FEATURES
Brake lever — The brake can be applied by squeezing the
brake lever.
Engine switch — The engine switch must be placed in the
ON position to start the engine. To stop the engine, place the
switch in the OFF position.
Fuel valve — This vehicle has one manually operated fuel
valve featuring 2 positions.
In the ON position, fuel is allowed to flow into the carburetor
when the engine is running or being started.
In the OFF position, fuel is shut off from the carburetor. The
fuel valve needs to be placed in this position when the mini
bike is not in use.
Fuel tank cap — To open the fuel tank cap, turn the cap
counterclockwise. To close, turn the cap clockwise and
tighten it securely.
Light switch — Turns headlight on and off.
Manual choke lever — When engine is cold, place the choke
lever in the ON position. When engine has warmed up, move
lever back to the OFF position.
Pull cord — Pull the pull cord to start the engine.
Throttle grip — Controls engine and mini bike speed. Ro-
tate the throttle grip backward (toward operator) to increase
engine and mini bike speed. Rotate the throttle grip forward
(away from operator) to decrease engine and mini bike speed.
SEAT
SIDE STAND
FUEL TANK CAP
FRONT TIRE
REAR TIRE
BRAKE LEVER