Baumatic BCS450SS - Manual (Page 23)

Oven cavity steam-cleaning cycle
The purpose of this feature is to facilitate the removal of food and grease
from the oven cavity after cooking.
o
Fill the water jug with clean water, either cold drinking water or
bottled (softened) water.
o
Fill the water jug up to the mark. DO NOT fill the jug right to the
top. Otherwise the water that is pumped back into the jug at the
end of the cleaning cycle may overflow.
o
Reattach the jug cover and insert the jug into the water jug
compartment.
o
Push the jug in completely to ensure a perfect seal between the
tube located in the jug and the hydraulic circuit inside of the oven.
23
o
Switch the oven on using the oven ON/OFF button.
o
Press the Clean button on the control panel.
o
The cleaning function symbol will light on the control panel
o
A speed indicator will appear on the digital display.
o
Press OK to confirm.
o
The cavity will fill with a quantity of steam for approximately 30
minutes.
o
The steam will heat to 100°C
o
When the cleaning cycle is finished, use a damp soft cloth or damp
non-abrasive sponge to wipe over the cavity of the oven.