Baumatic BMC460BGL - Manual (Page 19)

19
IMPORTANT: You must select the cooking function within 10
seconds or the displayed default setting will be programmed.
o
Press the temperature setting button (5) to change the
temperature. Turn the adjustment dial (8) to select the required
temperature from 100 - 230°C increasing in 5°C intervals. The
maximum temperature is 230°C and the minimum temperature is
100°C.
o
Press the timer button (6) to change the cooking time. The default
time set is 10 minutes. Turn the adjustment dial (8) to set the
required cooking time. The maximum time is 5 hours.
o
Press the start / stop button (7) and the oven will begin to cook.
IMPORTANT: The inside of the oven and the food that you
have been cooking may be extremely hot, so care should be
taken when removing items from the cavity. We would
recommend that you use an oven glove.
o
After the food has been removed from the cavity, you should make
sure that the door is closed.
Preheating function
Some of the conventional oven cooking functions will require a
preheating cycle beforehand to ensure the oven is properly heated
before food is introduced into the cavity.
o
After selecting the required oven function and temperature as
outlined in the “Oven Cooking” instructions on the previous pages,
press the preheating function button (3).
o
Press the start / stop button (7) to begin the preheating part of the
cooking process.
NOTE: The oven timer will not start the countdown as this is
only the preheating function. However there will be a
temperature bar at the top of the LED display which will show
the pre-heat progress.
IMPORTANT: If the door is opened during this process, the
preheating function will be cancelled.
o
When the required temperature is reached, an alarm will sound 3
times. To silence the alarm, press the start / stop button (7). The
oven heating and alarm will turn off automatically after 2 hours.
o
Place your food to the oven and Press the start / stop button (7) to
begin the cooking part of the selected function.