Baumatic BMC460BGL - Manual (Page 23)

Microwave and bottom-heat cooking
o
Place whatever you are cooking in the centre of the microwave
cavity and then close the microwave door. IMPORTANT: You
should make sure that the door of the microwave is shut
securely.
o
Turn the cooking function selection dial (1) twice clockwise
to select combination cooking mode. When the microwave
symbol and the cooking symbol appear on the LED display
this means that the oven has entered the correct cooking
mode.
o
Turn the adjustment dial (8) to select the bottom-heat
cooking function. The default temperature set is 180°C.
IMPORTANT: You must select the cooking function within 10
seconds or the displayed default setting will be programmed.
o
Press the temperature setting button (5) to change the
temperature for the bottom-heat element. Use the adjustment dial
(8) to set the required temperature from 100 - 230°C increasing in
5°C intervals. The maximum temperature is 230°C and the
minimum temperature is 100°C.
o
Press the microwave power button (2) to change the power setting
of the microwave. The default power level is 300W. Use the
adjustment dial (8) the set the required power level from the
following options: 700W – 450W – 300W – 100W.
o
Press the timer button (6) to change the cooking time. The default
cooking time is 10 minutes. Use the adjustment dial (8) to set the
required cooking time. The maximum time is 90 minutes.
o
Press the start / stop button (7) and the oven will begin to cook.
IMPORTANT: The inside of the oven and the food that you
have been cooking may be extremely hot, so care should be
taken when removing items from the cavity. We would
recommend that you use an oven glove.
o
After the food has been removed from the cavity, you should make
sure that the door is closed.
23