Baumatic BCE520SL User Manual
Page 21
o
To keep the solid plates in good condition, you should put a little
olive oil onto a kitchen towel and rub it onto the surface of the
plate. The next time the plate is used, it may produce a little
smoke.
o
Alternatively, you can use a hotplate conditioner; these products
can normally be found at larger supermarkets and hardware
stores. The manufacturer’s instructions should be followed when
using these products.
o
IMPORTANT: If the solid plates are not maintained regularly
with olive oil or a hotplate conditioner, then they may rust.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o
Remove all oven shelves and the drip tray.
o
Unscrew the bulb cover.
o
Unscrew the bulb and remove it from its holder.
o
Replace the bulb with a 15 W/300°C, screw type pygmy.
o
Do not use any other type of bulb.
o
Screw the bulb cover back into its original position.
21