Baumatic BMC253SS - Manual (Page 20)

20
o
Press the start button (D) and the microwave will start to pre-
heat the oven cavity to the temperature that you have selected.
o
Once the required temperature inside the oven cavity has been
reached, an audible signal will sound twice and the LED display
will flash.
o
IMPORTANT: If after 30 minutes the pre-heating temperature
has not been reached, the audible signal will sound twice. At this
point you should input the cooking time that you require.
o
You cannot set the cooking time until pre-heating has finished.
o
If a cooking time is not set within 5 minutes after pre-heating is
complete, the oven will stop heating and an audible signal will
sound five times.
o
Use the door button (F) to open the door of the microwave.
o
Place whatever you are cooking in the centre of the microwave
cavity and then close the microwave door. IMPORTANT: You
should make sure that the door of the microwave is shut
securely.
o
You cannot set the cooking time until the door of the microwave
has been opened and closed again.
o
Turn the adjustment dial (E) to set the cooking time that you
require. The maximum cooking time that you can set is 95
minutes.
o
Press the start button (D) and your microwave will start to cook.
o
If you have set the incorrect cooking time or temperature, press
the stop/clear button (C) and the LED display (A) will return to
showing the time of day.
Interrupting a cooking cycle
o
If you wish to temporarily interrupt a cooking cycle when it is in
progress (for example to stir what you are heating), you should
press the door button (F).
o
The door of the microwave will open and it will stop heating
immediately.
o
To restart the cooking cycle, close the microwave door and then
press the start button (D).