Baumatic BMC253SS User Manual
Page 31
Aperture and ventilation requirements
o
The diagram above shows the aperture and ventilation
requirements that you require to build the appliance into a
housing unit.
o
Ensure that the rear panel of the furniture housing unit has been
removed.
o
This oven may be installed without any additional ventilation cut
outs being made in the housing unit. However the ventilation cut
shown in the diagram MUST be present, otherwise the
microwave oven may not function correctly.
o
Do not cover the ventilation slots or air intake points.
o
WARNING: The microwave will get hot during operation;
care should be taken not to accidentally come into contact
with the outer surface.
o
WARNING: Children should not be allowed near to the
appliance unsupervised.
31