Digital Media 900TL - Manual (Page 3)

PK–02586–IL
1 ) Power LED. Lights when the MAU has power.
2 ) Module OK LED. Lights when the MAU passes its
self-test. If the MAU fails its self-test, the OK LED is
off.
3 ) Ring A/B LEDs. In a hub, either the A LED or the B
LED is on to show the ring. In a standalone MAU,
both Ring LEDs are always off.
4 ) Speed LEDs. Either the 16 LED or the 4 LED is on
to show the ring speed.
5 ) Eight Lobe LEDs. Lights when a station has access
to the network.
6 ) Eight Lobe Connectors. Connects a station to the
network. The MAU connects up to eight stations with
shielded or unshielded 100-ohm cable, and 150-ohm
IBM Type 1 data cable using an impedence matching
transformer cable (Digital part number BN26T-03).
7 ) Reset Switch. Resets the MAU to factory defaults.
To reset: while turning on the power, press the reset
switch with a pen or screwdriver.
Front Panel
Notes:
The DECmau 900TL has speed detect, which
ensures the integrity of the network. At startup, a
MAU determines the ring speed based on the
speed settings of the majority of the stations on the
ring and the Ring Out port. In a hub, the MAU then
connects to the appropriate ring in the hub. After
startup, speed detect prevents stations with the
wrong speed setting from connecting to the net-
work.
Network management can override any of the
MAU’s factory default settings.
DECmau 900TL 3
LKG-8145-93I
6
4
3
5
1 2
7